Форум керамистов

Художественная керамика - форум сайта "КерамикАрт.Ру"

Вы не зашли.

#1 2017-08-05 16:15:56


What's the size of my nios application?


I have a nios system in a BeMicroMAX10 and I'm using Quartus II web v15.02. I have "Reduced device drivers" and "Small C library" checked in the BSP properties. Quartus reports, in the summary after compilation: "Total memory bits 174080/387072 (45%)". This is ,I assume, for the 20KB I set the on-chip ram to in Qsys. My main.c file is very simple as I'm learning this.

Where do I find the size of the on-chip ram for main.c or the software application? There is a summary.html but I can see the info there.

BTW I'm using Single uncompressed image with memory initial... and programming the pof to CFM0. I have no flash ip in my qsys system.

I didn't find the right solution from the internet.
https://www.alteraforum.com/forum/showt … hp?t=35124
Trademark Management Video Examples



Board footer

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson


Rambler's Top100